The latest post from BicycleDutch isn’t even about bikes and transit, it’s about biking in the rain. But the location where it was filmed in Utrecht provides the opportunity to also get another good look at an exceptional solution to a common issue frequently raised about separated bikeways: what to do around a transit stop.
The preferred approach is to use floating transit stops that allow bicyclists to pass by without coming into conflict with buses (or trains) and only minimal interaction with passengers. Floating stops can even be used with conventional bike lanes as they remain a great way to address the problem of buses and bikes. Yet, the minute details continue to evade many planners and engineers, resulting in facilities that can be dramatically bad.
As can be seen in BicycleDutch’s video, there is a bus stop directly adjacent the bikeway. Yet, despite this being one of the busiest locations for bus activity along Potterstraat, transit users do not present a problem to the bicyclists at all. As they exit the bus, they are on a relatively wide island that is lined with a barrier, ensuring that the interaction between users occurs at as few a points as possible. While most Dutch transit stop bypasses aren’t quite that wide nor do they include a barrier, the concept is still carried forward.
But perhaps the most important part of the design is how the bikeway passes the stop. In the one featured in the video, it is a straight line with no deviation at all. That is preferred, but likely not always practical. In the absence of that opportunity, everything should be done to make the curve as smooth as possible and it should be designed for a realistic biking speed (i.e. 20+ MPH). When done right, riding around a stop is a pleasant experience that is barely noticeable.
In tandem with protected intersections, transit stop bypasses are a great way to build a protected bikeway network. Since both infrastructure elements can work with traditional bike lanes, they offer a great way to tackle the biggest problems of a separated bikeway first, then fill in the remaining gaps as money becomes available. The biggest challenge is getting the minute details right, so planners and engineers should travel to and ride both the best and worst examples to get a real feel of how to build them properly.